How To ... ANSYS - Tutorials, Tips and Tricks

In today's post, we will deal with another error that may occur during the analysis. The error that is described below concerns Fluent and the wrong definition of user monitors that are displayed during simulation. These can be monitors concerning the average velocity in the domain volume, the values of the maximum temperatures of the solid domains, the average values of the heat transfer coefficient from the defined planes of the model, etc. Generally speaking, today's entry is about how to correctly define monitors and how to transfer them between subsequent analyzes. Example of "gui-domain-label" error in Fluent 

An important element of each CFD and structural simulation is the precise definition of the global coordinate system. An improperly located coordinate system can lead to many difficulties - primarily in analyzes where the movement of individual elements is defined. Example of bad geometry position vs coordiante system 

 In an earlier post, I presented how to configure CAE calculations using the GPU in Ansys Mechanical. Today I would like to show you how to configure the use of a graphics card in Ansys Fluent. First of all, you need to correctly configure the proportion of the use of the amount of CPU to GPU depending on the HPC license you have. How to properly use GPU in Ansys Fluent 

The time scale factor is a parameter that controls the size of the time step used in the pseudo-transient approach for steady state simulations. The pseudo-transient approach is a method that stabilizes the numerics by adding a time derivative term to the governing equations and marching the solution in time until a steady state solution is reached 1 . The time scale factor can be either specified by the user or computed automatically by ANSYS Fluent. By default, ANSYS Fluent will compute the time scale factor based on the representative length scale and velocity scale of the flow, as well as the Courant number. The Courant number is a dimensionless number that measures the ratio of the physical time required for a fluid particle to cross a cell to the numerical time step 2 . The choice of the time scale factor depends on the type and characteristics of your fluid flow, such as the density variation, the flow regime, and the convergence criteria. Here are some general guidelines for ch