💥💥💥 What are capabilities of SU2 (cfd software) ?

 SU2 is a suite of open-source software tools for the numerical solution of partial differential equations (PDEs) and performing PDE-constrained optimization. It has applications in computational fluid dynamics, aerodynamic shape optimization, electrodynamics, linear elasticity, heat equation, wave equation and thermochemical non-equilibrium. It also supports continuous and discrete adjoint methods for sensitivity analysis and optimization. You can find more information about SU2 on its official website or its Wikipedia page. 😊

You can model:

• External aerodynamics: You can simulate the flow around aircraft, cars, buildings, wind turbines, etc. using the Euler, Navier-Stokes or RANS equations. You can also perform shape optimization and sensitivity analysis using the adjoint methods.
• Internal flows: You can model the flow in ducts, pipes, nozzles, turbines, compressors, etc. using the same equation sets as above. You can also use the turbomachinery capabilities of SU2 to perform single-passage or full-annulus simulations and aeroelasticity analysis¹.
• Multiphysics problems: You can couple the flow solver with other physical models, such as electrodynamics, linear elasticity, heat equation, wave equation and thermochemical non-equilibrium. You can also use the FSI capabilities of SU2 to model fluid-structure interactions.
• Discontinuous Galerkin methods: You can use the DG solver to discretize the flow equations on unstructured grids with higher-order accuracy and stability. You can also use the DG solver for problems involving shocks, discontinuities and complex geometries.

• Incompressible flows: You can use the artificial compressibility method or the pressure-based solver to simulate the flow of incompressible fluids, such as water or blood, using the Navier-Stokes equations. You can also use the turbulence models available in SU2 to account for the effects of viscosity and eddy formation.
• Compressible flows with shocks: You can use the Roe, AUSM, or HLLC schemes to capture the shock waves that arise in high-speed flows, such as supersonic jets or rockets. You can also use the shock-capturing techniques, such as the Jameson or Venkatakrishnan limiters, to prevent spurious oscillations near the shocks.
• Reacting flows: You can model the combustion of fuels and oxidizers using the species transport equations and the Arrhenius reaction model. You can also use the flamelet model to simplify the chemistry and reduce the computational cost. You can also simulate the flow of ionized gases using the MHD equations and the Saha equation of state.

Can I model Conjugate Heat Transfer Analysis in SU2?

Yes, you can model conjugate heat transfer (CHT) analysis in SU2. CHT is a type of multiphysics problem that involves the coupling of the energy equation in both fluid and solid domains. SU2 can handle both static and transient CHT problems with different types of boundary conditions and interface treatments. You can also use the discrete adjoint method to compute sensitivities and gradients for CHT problems, which can be useful for shape optimization and design¹².

To set up a CHT simulation in SU2, you need to define multiple physical zones in the configuration file, each with its own solver and boundary conditions. You also need to specify the CHT interfaces between the zones, which can be either matched or non-matched. SU2 will automatically exchange the heat flux and temperature values across the interfaces during the simulation. You can find some examples and tutorials on how to perform CHT analysis in SU2 on its official website or its Wikipedia page. 😊

Can I model conjugate heat transfer analysis with rotating fan (mixer/ impeller)
in SU2 ?

Yes, you can model conjugate heat transfer (CHT) analysis with rotating fan (mixer/ impeller) in SU2. This is a type of multiphysics problem that involves the coupling of the fluid and solid domains with a rotating boundary condition. You can use the sliding mesh technique or the multiple reference frame (MRF) method to account for the relative motion between the rotating and stationary zones. You can also use the harmonic balance method to reduce the computational cost of unsteady simulations.

There are some examples and tutorials on how to perform CHT analysis with rotating fan in SU2 on its official website or in the literature¹²³. You can also find some useful tips and tricks on the SU2 forum or the [SU2 wiki]. 😊

⁴: https://su2code.github.io/forum/ : https://github.com/su2code/SU2/wiki