The error message you're encountering in Ansys Electronics Desktop
The quality of some mesh elements is not acceptable for solution. Please check the geometry for issues in the following location..
indicates that the mesh quality in a specific location (X=0.00536424, Y=-0.0146285, Z=-0.0061444) is below the acceptable threshold for accurate simulation results. Here are some steps you can take to address this issue:
* Refine Mesh in the Problematic Area: Increase the mesh element density around the coordinates mentioned in the error message. This can be done by locally refining the mesh in that specific region.
* Check Geometry for Issues: Double-check your geometry for any inconsistencies or imperfections that might be causing the meshing issue. Ensure there are no self-intersecting faces, very thin slivers, or sharp corners that can lead to poor mesh quality.
* Adjust Mesh Settings: Experiment with different mesh settings like element size or curvature-based refinement to improve the overall mesh quality.
* Avoid Disabling Mesh Check (SKIP_MESHCHECK): Disabling the mesh check (SKIP_MESHCHECK) is not recommended as it can lead to inaccurate simulation results. It's better to address the underlying mesh quality issue for reliable simulations.
If you've tried these steps and are still facing difficulties, consider consulting the Ansys Electronics Desktop documentation or online forums for more specific troubleshooting guidance related to your model.
No comments:
Post a Comment