How To ... ANSYS - Tutorials, Tips and Tricks

Ansys Static Structural is a software that allows you to perform linear and nonlinear static analysis of structures, such as beams, plates, shells, and solids. One of the important aspects of static structural analysis is the contact between different parts of the structure, which can affect the stress, deformation, and load transfer. According to the web search results, there are three main types of contacts in Ansys Static Structural: bonded, frictionless, and frictional¹². Each type of contact has different characteristics and applications, depending on the behavior of the interface between the parts. - Bonded contact: This type of contact assumes that the parts are perfectly attached to each other, and there is no relative motion or separation between them. This means that both the normal and tangential forces are very large and resist any external forces that try to break or slide the parts. Bonded contact is useful for modeling welded joints, adhesive contacts, or some bolted con

Supports are used to represent parts that are not present in the model but are interacting with it. Supports help truncate the domain, which helps in efficiently obtaining numerically accurate results without modeling parts of the geometry that are not of primary interest. There are different types of support available, among which you need to choose the appropriate one for your analysis. Here are some of the common types of supports and their explanations: - **Fixed Support**: This type of support constrains all the degrees of freedom of the selected entity (body, face, or edge). It means that the entity cannot move or rotate in any direction. Fixed support is equivalent to applying zero displacement to all directions. Fixed support is useful for modeling rigid connections or supports that do not allow any movement. For example, you can use fixed support to model a bolted joint or a clamped beam. - **Displacement Support**: This type of support specifies a zero or non-zero displacemen

ANSYS Fluent is a powerful software for simulating fluid dynamics and heat transfer problems. It can handle complex geometries (models) by using different meshing methods and workflows. Meshing is the process of dividing the geometry into small elements that can be used for numerical calculations. Depending on the type and quality of the geometry, you may need to use different meshing tools and techniques. One of the meshing methods available in ANSYS Fluent is the Watertight Geometry Workflow. This workflow is suitable for clean and watertight geometries, which means that there are no gaps, overlaps, or errors in the geometry. The Watertight Geometry Workflow can automatically generate a high-quality mesh for complex geometries, such as aircraft, cars, or turbines. You can also customize the mesh settings and refine the mesh in specific regions. To learn more about the Watertight Geometry Workflow, you can watch this video or take this course . Another meshing method available in ANS

An important element of each CFD and structural simulation is the precise definition of the global coordinate system. An improperly located coordinate system can lead to many difficulties - primarily in analyzes where the movement of individual elements is defined. Example of bad geometry position vs coordiante system