In this post, we compare the heat conduction dynamics of geometry from the previous postss in two directions: longitudinal and transverse. Of course, all boundary conditions, or more precisely, their value, remain unchanged. The only variable will be the modification of their position.
 |
| Transverse or Longitudinal - which conduction is more dynamic ? |
In the next stage, we define the finite element mesh. Due to the fact that we are dealing with simple geometry, the only variable we will determine is the size of the finite element. In our case it will be a cube with a side length of 1mm.
 |
| Defining the finite element mesh in Ansys Workbench |
In today's post, I would like to show you a tutorial in Transient Thermal on the analysis of the influence of conductivity due to the different location of the same boundary conditions for the same geometry.
 |
| Influence of conductivity in Ansys Transient Thermal |
In today's post, I would like to show you how to easily and quickly modify the geometry for strength calculations in Structural modules. Two steps are enough to easily change the model topology in the Design Modeler module.
 |
| How to move and rescale part in geometry - Design Modeler |
In today's post, I would like to show you a tutorial on heat transfer through partitions. Thanks to such an analysis, we are able to determine the insulation performance of a building or device. We are also able to determine the size of thermal bridges in the analyzed geometry.
 |
| Thermal analysis of baffles model in Ansys Fluent |
In today's post, I would like to introduce you to the theory of turbulence. It is important to know the basic issues of fluid mechanics because thanks to this we are able to verify our assumptions and simulation results.
 |
| Fluid flow mechanics |
Today I would like to introduce you the straight 12 steps of CFD Analysis Modeling in Ansys Fluent. With these clues, you are able to model 90% of the problems of fluid mechanics.
 |
| 12 steps of CFD modelling in Ansys Fluent |
In today's post, I would like to show you a classic tutorial with which beginners in CFD modeling should start. It is an analysis of the gas flow around the cylinder based on one laminar flow model.
 |
| Laminar flow over cylinder in Fluent |
In today's post, I would like to introduce you to a simple tutorial on the phenomenon of melting material. Our hero will be wax which we will melt with the help of a given heat flux. Of course, in Ansys Fluent we can simulate both melting and solidification.
 |
| Melting a wax in Ansys Fluent |
You've often wondered what could be the reason why your simulation crashes and an overflow error pops up. Today I would like to introduce you seven tips on what could be causing this error and how to deal with it.
